Oxy Kits

2 Results

Soldering & Brazing FAQs

How do I dispose of gas cylinders other than LPG?

Empty disposable gas cylinders can be dropped off at your local hazardous waste facility which you can find on Recycling Near You (we recommend contacting to see if they accept your type of gas cylinder). Read our full gas cylinder disposable guide here.

How does the Oxyset compare to oxy-acetylene brazing?

The Oxyset (1811167-2) can be used to braze copper pipes up to 1.5" (38mm) in diameter. Whilst oxy-acetylene produces a higher flame temperature, oxy-map produces a high flame temperature suitable for many brazing applications. Due to its compact size and weight, the Oxyset is an ideal companion for plumbers, gas-fitters and HVAC technicians.

How long does the Oxygen Cylinder run for?

As the highest-pressure disposable cylinder in the market, Bromic 1L Oxygen Disposable Cylinder provides more gas in a compact cylinder. When used with the Oxyset tip #1 and Map//Pro gas, the Bromic 1L Oxygen Disposable Cylinder allows roughly 45 minutes of run time. Actual consumption rates may differ depending on the user and settings.

Nozzle Supplied with
Oxyset 1811167-2
Oxygen (1L cylinder)Fuel Gas (400g cylinder)
#1160 g/h (45 mins)35 g/h (11.0 h)
#2260 g/h (30 mins)70 g/h (5.5 h)
#3 290 g/h (25 mins) 105 g/h (3.5 h)
#4380 g/h (20 mins)135 g/h (2.5 h)
#5535 g/h (15 mins)200 g/h (2.0 h)
Note: These figures are only intended for estimation purposes only. Last updated 01/2023

The OXYSET (1811167-2) is fuelled by a disposable oxygen cylinder (T-PED approval number 0036) and
a disposable MAP//Pro cylinder (complying with DOT39). We recommend using Bromic oxygen
cylinders (P/N 1811320) and BernzOmatic MAP//Pro cylinders (P/N 1811120).

What is the flame temperature of the Bromic Oxyset (1811167-2 and 1811168)?

The Oxyset uses a mixture of Map-Pro and oxygen gases. The ratio of the mixture affects the flame temperature, but when the ideal mixture occurs so that a blue flame is present the flame will have a temperature of up to 3000°C (5400°F).

What is the Bromic Oxyset Mobile Brazing Kit flame temperature?

The flame temperature is about 3200 degrees Celsius, but this depends on the ratio of oxygen to fuel when burning.

What is the working pressure for each gas when using the Bromic Oxyset Mobile Brazing kit?

Map-Pro has a working pressure of 0.5-0.9 bar. Oxygen has a working pressure of 4-6 bar.

Soldering & Brazing - Frequently Asked Questions
Soldering & Brazing - Category Description

Oxy Kits

We supply a range of gas soldering and brazing kits that can be used with various gas applications including brazing, soldering and cutting copper pipes. Instead of using a traditional oxy-acetylene setup, our kits are designed to be used with Oxygen and Map-Pro gas cylinders for extra safety, affordability and lightweight convenience.

View more categories

Bromic Plumbing & Gas